The ramblings of a computer geek
When attempting to add a VMWare vCenter Server Appliance to our Active Directory I encountered this error message: “Error: Invalid Active Directory Domain”. Within the /var/log/vmware/vpx/vpxd_cfg.log log file I was seeing the following: It would seem that the root record for the domain is missing, this should resolve to a domain controller, so it has […]
More...Seems on the face of it to be something that you can find in the GUI, but its not quite that easy! Based on this link: https://psvmware.wordpress.com/2013/07/04/where-are-virtual-machine-templates-located/ You can find it out by running the following, this will provide you with the name of the template, the host it is currently on and where the […]
More...VMWare TPS (Transparent Page Sharing) is a mechanism within the hypervisor to allow the saving of RAM by allowing virtual machines where their memory matches to only store a copy of the memory used once. I.e. If you had 5 Windows 2012 R2 virtual machines running, they are going to be almost completely identical, so […]
More...I had to make some memory changes on a batch of VMs. I didn’t want to have to manually shutdown each VM, alter the memory setting and then restart as this would be very time consuming instead I prepared this script. You first need to create a CSV file, e.g. vmalterlist.csv and place it somewhere on […]
More...What do you do, when you have a virtualised vCenter VM, but you want to adjust something about it without locking yourself out of vCenter. In my case I had a vCenter server that I wanted to adjust the memory on. To do this without locking yourself out, you should follow these steps: 1. First […]
More...If you have a webserver that you want to check, but it requires authentication, you can still perform a check without seeing an error code. So for example, if you had a webserver where you wanted to check that the web server was responding on port 80, but didn’t want to have the plugin login […]
More...The VCSA appliance deployment has changed to be a Microsoft Windows only affair. Unless you perform a few steps first you could end up with the issues below. PROBLEM: During the deployment of the VCSA appliance you get the following error messages displayed: Failed to set the time via NTP. Details: Internal Error. Code 1 […]
More...If you need to determine the IOPS that are being used of the storage by the Virtual Machines you can run a PowerCLI script to connect to the vCenter and then collect the IOPS statistics. The script collects the read/write average IOPS and the read/write maximum IOPS for each virtual machine, because of this the […]
More...If you occasionally need to reboot a Linux box as a one off one evening you can perform the following commands using the at command. Note if you set a time that has just past it will perform the reboot the following day. So lets say its 16:15 and you want to schedule a reboot […]
More...PROBLEM: You need to check if two domain controllers are in sync with each other. SOLUTION: To do this you need to understand a bit about how Active Directory reports if a domain controller replication is in sync. There is something called a UTDV up-to-dateness vector that is basically a number representing what the domain […]
More...