I had a cisco 3750 switch that i wanted to enable some vlans for voice on, but only having one DHCP server on a completely seperate vlan to the voice vlans.
vlan 1 = data (dhcp server on this range)
vlan 266 = voice (phone dhcp clients on this range)
PROBLEM
The switch for some reason had aload of dhcp server config on it before i started the exercise, so i removed the pools and ran the command: no service dhcp
This was the problem, running this command (no service dhcp) disables dhcp but also disables dhcp relay to, this stops the ip helper-address command from working too.
So even when i put the ip-helper address on the vlan as below it didn’t relay the dhcp broadcasts from the 266 vlan to the dhcp server on vlan 1.
interface Vlan266
description *** VOIP-BBlock ***
ip address 172.29.66.1 255.255.255.0
ip helper-address 172.19.5.131
Where 172.19.5.131 is the DHCP server address.
RESOLUTION
So to fix it, i ran the command:
service dhcp
Making sure any dhcp pool configuration has been removed, and this fixed the problem.