The ramblings of a computer geek
The * means prompt for a password. Example Okay say you have a member server that has fallen off the domain, but you don’t want to go through the normal procedure of using “My Computer”->”Computer Name” and then disjoining to a WORKGROUP rebooting, then re-joining to the domain and rebooting again. Note: You need to […]
More...How to setup the NSClient++ on Windows
More...Open ADSI edit. Configuration-> Services- > NetServices Checked the properties of: CN=DhcpRoot Then edited this attribute: dhcpServers There was one server listed in there: i172.17.5.1$rcn=cdc.domain.com$0x00000000$dcdc01.domain.com$ This was the one that seemed to be left hanging around. Took a note of the settings just incase then deleted it and clicked “OK” to apply the settings. Checked […]
More...Here was a weird one, Word 2003 froze on startup, opening the document in word 2007 was the key to it, in the bottom left, it flashed up trying to connect to \\servername\folder\test.dot. Hmm in our case the servername was the name of a server that had been decommissioned! WOrd 2007 allows you to hit […]
More...RAID (Redundant Array of Inexpensive Disks) is a way of organising and using disks (Hard Disks) to increase performance or provide fault tolerance. RAID can also be set up to provide both functions at the same time. RAID is a set of two or more ordinary hard disks and a specialized disk controller that contains […]
More...When trying to install Puremessage, you need to upgrade the instance of MSDE you are using to a specific verson MSDE 2000 SP4. More details at this page on the Sophos support site. http://www.sophos.com/support/knowledgebase/article/46290.html If when trying to upgrade MSDE you get an error saying you need to change the SA password, you are not […]
More...To ensure I have a good off-site synch of my data i now use DeltaCopy http://www.aboutmyip.com/AboutMyXApp/DeltaCopy.jsp its basically a version of rsync for windows. Its quite simple to setup and works well. The package includes the client and the server. In my case i have two servers, one local, one remote, the two sync with […]
More...I had the problem that the APC UPS Management Card Utility software used to configure the IP was not working. It detected the unconfigured card okay, and prompted for the settings but never took them. In the end I found a document from APC support that showed a workaround to get it configured. Note: you […]
More...This is the procedure to match a (VMWare Datastore and) VMWare LUN ID to the underlying storage ID on an EMC SAN. (The procedure would work for another type of SAN as long as you can get the UUID off the SAN for each LUN. With help from # KB Article: 1005587 # Updated: Aug […]
More...This is a way to move the VMDKs for a VM from local storage to the SAN. First you need to get your SAN hooked in, once you do this, SSH onto the box, under your vmfs directory you’ll find the directories (links) to the LUNs presented from your SAN. To move from /vmfs/volumes/storage1 to […]
More...